Simple Guide on How to Install Avaya B179 on IP Office

The Avaya B179 IP Conference Phone works perfectly with Avaya IP Office.   It is supported on IP Office R5.0 and higher, and requires an Avaya IP Endpoint license.  We will provide a basic tutorial here to get your Avaya B179 IP Conference phone connected.  Please see the Avaya B179 Install and Admin Guide for a more in-depth guide.

Avaya B179

1)   First, let’s make sure the IP Office is setup correctly:

  • Log into your IP Office
  • Go to the License Tab > Make sure you have an Avaya IP Endpoint license available (the 3rd Party IP/SIP Endpoint will not work)
  • Go to System > LAN1 or LAN2 (whichever interface is connected to the network the B179 is on) > VoIP tab:
    • Check “SIP Registrar Enable”
  • Create a new extension by selecting Extension > create SIP Extension
    • Add a valid Base Extension number i.e. 8000
  • Create a new user by selecting User > create User:
    • Add a valid Name ie Extn8000
    • Add the Base Extension number that was previously created. i.e 8000
    • Go to the Telephony tab > Supervisor Settings tab:
      • Put a numerical password in the “Login Code” field.  For testing purposes we can use 8000.

2)   Then, configure the Avaya B179:

  • On the B179 conference phone:
    • Press Menu > Status > Network
      • Set or Confirm the IP Address of the phone (DHCP/Static)
        • This IP address is used to log into the web interface of the phone.
  • Web Settings:
    • Enter the IP address of the phone into a web browser of your choice
      • Login with the default credentials
        • User: Admin
        • Password: 1234
    • Settings > SIP
      • Enable Account 1
        • Account Name: This is what is shown on the display of the B179.
        • User:  IP Office Base Extension number i.e. 8000
        • Registrar: IP of LAN1 or LAN2 IP Office interface (whichever is used)
        • Realm: *
        • Authorization Name:  IP Office Base Extension number i.e. 8000
        • Authorization Password: Enter the “Login Code” setup for the user.
        • Save values
    • Settings > Networking
      • These fields are used to make sure your B179 is setup correctly to the network
        • IP Address: IP address of B179
        • Net Mask: Subnet mask of the network on which the B179 is connected
        • Gateway: Local gateway on the network on which the B179 is connected
        • DNS info can be manually specified
        • Save values
        • Reboot the phone and the B179 should register with the IP Office

This should get your Avaya B179 IP Conference Phone connected to your IP Office for testing purposes.  Then from here on, you will want to fine tune your settings and secure your phone following the Avaya B179 Install and Admin Guide.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Current [email protected] *