Tag Archives: Panasonic

How to Configure Panasonic IP Phone with Asterisk

The Panasonic SIP IP Phones are top-notch end points from a brand name you trust. Getting them setup and working usually isn’t very difficult if you know what info needs to go into what fields.  The following tutorial applies to the follow phones, however, some interfaces may change slightly from model to model: KX-UT113-B, KX-UT123-B, KX-UT133-B, KX-UT136-B, KX-UT248, KX-UT670, KX-TGP500, KX-TGP550.

Configure Panasonic

First you will need to setup the extension on your Asterisk System (the process can vary depending on the distribution). From this process, you will need the:

  • IP Address of the Asterisk Server: ie: 192.168.42.100
  • SIP Port of the Asterisk Server: ie: 5060
  • Extension SIP ID/Alias: ie: MAC Address of phone
  • Extension Number: ie: 7000
  • Extension Password: ie: 1234pass
  • Voicemail Access Number: ie: 8500

Next we will get started on configuring the phone itself.  Please note, this is tutorial on how to get your phone connected.  Advanced functionality is not covered:

  • Connect the phone to the network and power it on
  • Once connected to the network, you will need to turn on embedded web from the individual phone settings (turns off after a while). Press the Setup button > Select Embedded web > Select On
  • Open up a web browser of your choice and type in the IP Address of the Panasonic IP Phone into the address bar.  A login screen should appear.  The default login is L: admin P: adminpass.
  • Once logged in, you should make sure you have upgraded the firmware to the current version, the link to the admin guide and firmware files can be found here: http://www.panasonic.net/pcc/support/sipphone/download/us.html
  • Select the VoIP tab and click on Line 1 under SIP Settings.  Fill in these fields:
  • Phone Number: Extension # assigned in Asterisk. ie 7000
  • SIP URI: Extension SIP ID/Alias assigned in Asterisk. ie: MAC Address of phone
  • Registrar Server Address: IP Address of the Asterisk Server. ie: 192.168.42.100
  • Registrar Server Port: SIP Port of the Asterisk Server. ie: 5060
  • Proxy Server Address: IP Address of the Asterisk Server. ie: 192.168.42.100
  • Proxy Server Port: SIP Port of the Asterisk Server. ie: 5060
  • Presence Server Adress: IP Address of the Asterisk Server. ie: 192.168.42.100
  • Presence Server Port: SIP Port of the Asterisk Server. ie: 5060
  • Outbound Proxy Server Address: IP Address of the Asterisk Server: ie: 192.168.42.100
  • Outbound Proxy Server Port: SIP Port of the Asterisk Server: ie: 5060
  • SIP Authentication ID: Extension SIP ID/Alias on the Asterisk. ie: MAC Address of phone
  • SIP Authentication Password: Extension Password on the Asterisk. ie: 1234pass

Config Panasonic with Asterisk Graph1Click Save

Lastly, Select the Telephone tab.  Then Select Line 1 under Call Control.  Fill in these fields:  Voice Mail Access Number: Voicemail Access Number on the Asterisk: ie: 8500

Config Panasonic with Asterisk Graph2Click Save and reboot the phone.

Your Pansonic IP Phone should be configured to work on your Asterisk IP PBX.  Any question? Just leave a comment or contact us at The Telecom Spot for assistance.

New Panasonic KX-UT248-B Promo

For a limited time, The Telecom Spot is offering an introductory special on the NEW Panasonic KX-UT248-B IP Phone. Quantities are limited, so get yours today!

Panasonic KX-UT248-B

The sleek designed Panasonic KX-UT248-B Executive SIP Phone is feature-rich:

  • 6 SIP Acc
  • 4.4 inch 4-level gray-scale graphical LCD
  • HD Voice (G.722)
  • Paper label free
  • 3-way conference call
  • 2 x GbE ports, PoE
  • Full duplex speaker phone
  • Built-in Bluetooth
  • Plug and Play configuration
  • Works with KX-A433

Any question? Just leave a comment or contact us at The Telecom Spot.